So today I’m going to walk you through something that took me a while to figure out. I had the DarsUnlocker loader sitting on my PC for a few days, and I wasn’t sure how the whole thing was supposed to work with UNLOCKTOOL. After playing around with it, I finally got the flow right. Let me share exactly what I did, step by step, so you don’t waste time like I did.
DarsUnlocker V5.5 Changelog
What’s New?
- Added Samsung Exynos 1-Click FRP removal directly from Odin Download Mode without enabling ADB.
- Added support for Android 15, 16, and 17, with One UI versions up to 9.0 on supported devices.
- Expanded One UI 8.5 support on selected platforms.
- Tested with security patches up to September 5, 2026.
- Added support for more Samsung Exynos chipsets, including Exynos 850, 990, 1080, 1280, 1380, 1480, 1580, 2100, 2200, 2400, 2500, and 2600, along with other listed platforms.
- Updated Samsung Qualcomm loaders.
- Added support for FRP erase, factory reset, readback, and flash backup on selected Samsung models.
- Added new loader support for Samsung Tab A9+, Galaxy A23 5G, Galaxy F14 4G, Galaxy Z Flip4, Galaxy Z Fold3 5G, Galaxy Z Fold6, and Galaxy S21 FE 5G.
- Fixed loader-related issues.
- Removed the VPN restriction.
- Fixed the “No server could be reached” error.
Note: Android and One UI support may vary depending on the device model, chipset, and firmware version.
Important: If your current version is working without errors, do not update unnecessarily.
Loader V5.5
- Supports all Custom DA / Custom Server DA for Xiaomi.
- Xiaomi Custom DA section is no longer empty.
- FMI OFF is working.
- Loader can run any UnlockTool version you want.
- Total file size stays under 500 MB for faster download.
Setup Steps
- Open
DarsUnlocker-installer-V5.exe. - Check all the checkboxes during setup.
- Wait for the loader to fully load.
- Do not open UnlockTool manually.
- Wait for UnlockTool to open automatically.
- When the Login button becomes clickable, click Login.
- Username and password will be entered automatically by the loader.
DarsUnlocker V3.0 Changelog
Loader & App
- DarsUnlocker V3 loader released.
- Uses UnlockTool 2026.08.25.0 app.
- Added Auto Sign-In.
- Automatically fills username and password.
- Automatically clicks Login.
- Corrects the username if a wrong one is entered.
Update Check
- Update check is now handled automatically.
- Removed the “New Version Available” interruption.
- App shows “You are using the latest version!” during login.
Auto-Restore
- Saves a backup of the correct UnlockTool version on first run.
- Checks the app version when starting.
- Restores UnlockTool 2026.08.25.0 automatically if another version is detected.
- Restarts the app after restoring.
Warnings & Errors
- Added clear warning for wrong app version.
- Added clear message for expired trial.
- Added clear message when the server is offline.
- Avoids stuck or empty screens when a problem happens.
New V3 Interface
- Added new splash screen.
- Added gold V3 badge.
- Added trial countdown.
- Shows remaining days and expiry date.
- Added Telegram button.
- Added Facebook button.
Requirements
- Windows 10 / 11 64-bit.
- Administrator permission required.
- Internet connection is required.
- Loader and app close automatically when offline.
- They start working again when the internet connection returns.
Installation
- Install folder contains only:
- DarsUnlocker.exe
- app.exe
Trial
- 30-day trial starts from the first run on each PC.
Version Details
- Loader: DarsUnlocker V3.0
- App: UnlockTool 2026.08.25.0
- Release Date: September 29, 2026
What Is DarsUnlocker?
DarsUnlocker is a small loader that sits between UNLOCKTOOL and the internet. When you open UNLOCKTOOL normally, it wants to talk to its own servers for login and license checks. DarsUnlocker runs its own local server on your PC and answers those requests instead. It also patches UNLOCKTOOL in memory so the login and license checks pass.
That means you don’t need a real paid account. You open the loader first, then open UNLOCKTOOL, and log in with the credentials the loader shows you.
How It Actually Works
Before we get into steps, let me quickly explain what happens in the background, because once you understand this, the whole process makes sense.
DarsUnlocker does three main things:
First, it decrypts a large data file that comes with it. That file contains a fake certificate, fake server responses, and other internal data that UNLOCKTOOL expects to see.
Second, it starts a small HTTPS server on your own computer. This server pretends to be the real UNLOCKTOOL server. When UNLOCKTOOL tries to log in or check your license, it’s actually talking to this local server, not the real one.
Third, it injects a small patch script into UNLOCKTOOL while it’s starting. That patch makes UNLOCKTOOL accept the local server’s answers instead of asking the real one.
Once all three things are running, UNLOCKTOOL thinks it’s talking to the real server and logs you in without any issue.
What You Need Before Starting
- A Windows PC
- The DarsUnlocker setup installer
- UNLOCKTOOL installed on the same PC
- Administrator access on your PC (this is important, the loader needs it)
- An internet connection for the first check (it works offline after that)
Step-by-Step: How to Install and Run Everything
Step 1 – Install DarsUnlocker
I right-clicked the DarsUnlocker setup installer and chose Run as administrator. This is not optional. If you don’t run it as admin, the loader will not be able to bind to the ports it needs.
The setup wizard opens. I clicked Next through each screen. There’s an option for Create a desktop icon — I kept that checked because it’s easier to launch later. Then I clicked Install and waited for it to finish.
When it was done, I clicked Finish. The installer also opened the app for me, which was convenient.
Step 2 – Let DarsUnlocker Loader Initialize
Once the loader opens, it starts working right away. I saw a small splash window appear. It checked my online connection status first, then began unpacking its internal data.
If a support message pops up with Telegram links, just click Ok to dismiss it. It’s normal.
Behind the scenes, the loader was doing a few things at this point:
- Checking the clock and syncing time
- Unpacking the encrypted data file
- Getting ready to patch memory when UNLOCKTOOL starts
I just waited for the loader to settle. You’ll know it’s ready when the splash window shows a status like “Ready” or “Waiting for login.”
Step 3 – Set Process Priority in Task Manager
This step matters more than people realize. Without setting the priority, the loader sometimes doesn’t hook properly and UNLOCKTOOL may not log in.
Here’s what I did:
I right-clicked the Windows Taskbar and opened Task Manager. Then I clicked on the Details tab. I looked for DarsUnlocker.exe in the list, right-clicked it, and chose Set priority. I selected High (you can also pick Above Normal).
Windows asked me to confirm the change. I clicked Yes.
I did the same thing for UNLOCKTOOL.exe once it was running, just to be consistent.
Step 4 – Log In to UNLOCKTOOL
Now the interesting part. I opened UNLOCKTOOL and let it load. On the login screen, I looked back at the DarsUnlocker window.
The loader showed me the generated login details:
- Username: aminebazouka (or whatever your loader shows)
- Password: any password you want
I typed that username into UNLOCKTOOL. For the password, I typed anything — literally any random text. Then I clicked Login.
When the disclaimer window appeared, I clicked Agree.
That’s it. UNLOCKTOOL loaded its main dashboard and I was in.
Step 5 – Start Servicing Devices
Once logged in, the tool is fully usable. You’ll see the main dashboard with all the brand tabs at the top or side. Just pick your target brand and start working.
The Brand Tabs and What Each One Does
UNLOCKTOOL groups everything by brand. Here’s a quick look at each tab and what operations it supports.
1. MIAOMI Tab (Xiaomi, Redmi, POCO)
This tab is for Xiaomi devices, Redmi phones, and POCO phones.
Available operations:
- Reset Mi Account (with bypass or disable option)
- Erase FRP (Google lock removal)
- Factory Reset / Hard Reset
- Bootloader Unlock and Relock (works in Fastboot mode and EDL mode)
- Disable OTA Updates
- Auth Flashing in EDL mode without needing an authorized account
- NVData and NVRAM Backup / Restore
2. SAMSUNG Tab
The Samsung tab covers most Galaxy devices.
Available operations:
- Erase FRP through multiple methods: MTP, Knox, Emergency Dial code (#0#), Testpoint, and EDL mode
- Factory Reset and Screen Lock removal
- Odin Flashing (supports Tar.md5 files)
- Disable Knox, PayJoy, and KG Lock on supported models
- CSC Change (region switch)
- Read and Write PIT File, plus firmware flash
3. VIVO Tab
For Vivo devices.
Available operations:
- Demo Mode removal
- V-Account Bypass
- Erase FRP
- Factory Reset (with a Safe Unlock option that protects your data)
- Auth Flashing for both MTK and Qualcomm chips
4. OPPO / REALME Tab
Covers OPPO and Realme devices together.
Available operations:
- OPPO ID Bypass
- Erase FRP
- Factory Reset and Screen Passcode removal
- Demo Unlock (removes live demo mode from shop units)
- OFP and OTA Firmware Flashing
5. HUAWEI / HONOR Tab
For Huawei and Honor phones.
Available operations:
- Erase Huawei ID (HNID)
- Erase FRP using Testpoint or USB COM 1.0 mode
- Factory Reset
- Firmware Downgrade and Flashing
- HiSilicon Chipset operations
6. APPLE Tab (iOS)
The iOS section. Note that not every iPhone model is supported — check the list below.
Available operations:
- Ramdisk Flashing and Boot
- iCloud Bypass (for Hello Screen or Passcode Lock)
- Backup and Restore Activation Records
- Fix Baseband and Network Signal on supported models
- Read and Write NVRAM / SysCfg
- Hidden Account removal
7. MEDIA TEK Tab (MTK Universal)
For MediaTek chipsets. This one is very handy because it works without any external box.
Available operations:
- Auth Bypass (SLA/DA bypass without a box)
- Read, Write, and Scatter Flashing
- Erase FRP (universal one-click)
- Factory Reset (Format Data)
- Bootloader Unlock and Relock
- Backup and Restore NVRAM and RPMB
8. QUALCOMM Tab (Sec / Universal)
For Qualcomm devices.
Available operations:
- EDL Mode Flashing (uses Firehose Programmer)
- Erase FRP via EDL or Fastboot
- Factory Reset
- Partition Manager (Read, Write, Erase partitions)
- Skip or Bypass PBL (Primary Bootloader)
9. UNISOC / SPREADTRUM Tab (SPD)
For Unisoc and Spreadtrum chipsets.
Available operations:
- PAC File Flashing
- Erase FRP through Diag or Boot mode
- Factory Reset and Pattern Unlock
- CPU Loaders support for chips like T606, T612, and T820
10. OTHER BRANDS Tab
This covers everything else that doesn’t fit the main brands.
Available operations:
- Tecno and Infinix MDM and FRP Lock removal
- Motorola Fastboot Reset and FRP
- LG, ZTE, and Nokia Direct Flashing and Reset
- Universal Fastboot and ADB commands
UNLOCKTOOL v2026.08.25.0 Changelog
A new update just came out. Here’s what changed.
Apple
- Added Boot Diag support for A12 and A13 devices to change device information
- Fixed the issue where the screen did not turn off automatically after Hello Bypass
- Added a note about restarting the software after changing the region code from CH/A to LL/A before running Hello Bypass
Supported Apple Devices in This Update
- iPhone 11
- iPhone 11 Pro
- iPhone 11 Pro Max
- iPhone SE (2020)
- iPhone XS
- iPhone XS Max
- iPhone XR
- iPad Air 3
- iPad mini 5
- iPad 8
Download Information
| Software Name | DarsUnlocker Bypass Loader + UNLOCKTOOL |
| Version | UNLOCKTOOL v2026.09.23.0 |
| License | Bypass Loader (Local Server) |
| Supported OS | Windows |
| Supported Devices | Xiaomi / Redmi / POCO, Samsung, Vivo, OPPO / Realme, Huawei / Honor, Apple, MediaTek, Qualcomm, Unisoc / Spreadtrum, Tecno, Infinix, Asus, Nokia, Motorola, Lenovo |
| Last Updated | 2026.09.23.0 |
.jpeg)
